30 Years

of Active Powder Handling
and Containment out of the Box

 

Case Study

Filter Dryer Discharge with Integrated Pack-Off

New drugs have very specific targets within our organisms and are effective at very low doses. Therefore, they are highly active not only for the patient but also for the potentially exposed plant operator during the pharmaceutical production process. In line with current safety regulations, it is hence important to take all measures to limit the spread of highly active substances within dedicated handling areas. The level of the required containment is determined by the pharmacological potency of the product to be handled. In the pharmaceutical industry, the Occupational Exposure Limits (OEL) are calculated on the basis of the NOEL (No Observable Effect Level) as well as additional specific factors for the time of exposure or the severity of the negative effects for instance. Those values are categorized in the widely used Occupational Exposure Bands (OEB). Substances with very high to high pharmacologic and toxic effects fall into categories OEB 4 (< 10 µg/m3) and OEB 5 (< 1 µg/m3) for which the industry increasingly uses isolators as appropriate containment systems.

Dec has been recently asked to propose a safe solution for the discharge of a filter dryer and integrated pack-off feature for which we have delivered a filter dryer discharge isolator with integrated pack-off feature, milling chamber and PTS (Powder Transfer System) conveying to a second pack-off isolator with future extension possibilities for a micronising chamber installed on top of the existing enclosure, all of which meeting category OEB 5 (0.3 µg/m3 , 8 hr TWA).

 

Filter Dryer Discharge Isolator

This double chamber negative pressure designed isolator installed in ATEX zone 1 area provides a high containment environment during the automated filter dryer discharge of highly potent APIs with a Minimum Ignition Energy (MIE) of less than 10 mJ. The unit comprises a rake tool to help with heel recovery through the dryer discharge port. Primary discharge is achieved using the agitator sweep. The lift-up front access door for end-of-campaign maintenance of the discharge port is provided with four glove ports. A glove port guard system, interlocked with the filter dryer ensures that access is possible only when pressure and agitator are in a safe condition. In this isolator, the product passes through a milling unit (through-the-wall design) into a suction shoe from where it is transferred by means of a PTS into a pack-off isolator at a transfer distance of 8 to 10 m. Alternately, it can be directly packed-off by means of a continuous liner pack-off head connected to the upper chamber but located within the lower chamber.

 

PTS Safe Powder Transfer and Dosing

The PTS (Powder Transfer System) utilizing both vacuum and pressure is suitable for operation in ATEX areas. The PTS is installed directly on the equipment to be charged. Equipped with an exchangeable CIP cover with integrated liquid separator, the equipment including the filter membrane can be cleaned in place without disassembling any components. The PTS works for all powders regardless of their characteristics, even those that are extremely fine, lumpy or even solvent wet, as during the transfer of such materials the PTS will not modify the homogeneity of the powder. The system excludes most sources of ignition owing to the earthed, conductive components, and the lack of moving parts that could produce incendive mechanical sparks. Its pneumatic operation does not require a source of electricity or motors, obviating electrical sparks and hot surfaces that could also be ignition sources. Electrostatic discharge remains the only potential ignition source; however, this is avoided due to the plug flow of powder in the dense conveying phase through the hose into the PTS chamber. The usual ratio of powder to air is more than 100:1, which is well above the upper explosion limit of most powders. Due to the low conveying velocity it has been calculated and measured that insufficient energy is created to form an electrostatic discharge and powders with an MIE (minimum energy required for ignition) below 1 mJ can be safely conveyed. In this case, the PTS combined with a DosiValve unit is installed on top of the pack-off isolator, receiving and dosing the material accurately into the isolator integrated continuous liners.

 

Pack-Off Isolator

This enclosure features a continuous-liner drum filling station and a roller conveyor on load cells. A self-cleaning venting filter system with liner deflating function vents the filling station during a powder charge. High containment level is maintained by using an airlock for material in- and outlet.

Both isolators are fabricated in accordance with cGMP standards featuring a fully welded design, i.e. the interior is constructed with rounded corners to provide smooth surfaces for easy cleaning. Both isolators also feature a Wash-In-Place (WIP) system consisting of hand-operated spray guns and additional spray balls in the upper chamber. Air quality is maintained by High Efficiency Particulate Air filters (HEPA) for both in- and outlet air filtration.

 

 

 

 


30 Years of Innovation - Let us handle your process

30 Years

of Active Powder Handling
and Containment out of the Box

 

Case Study

Filter Dryer Discharge with Integrated Pack-Off

New drugs have very specific targets within our organisms and are effective at very low doses. Therefore, they are highly active not only for the patient but also for the potentially exposed plant operator during the pharmaceutical production process. In line with current safety regulations, it is hence important to take all measures to limit the spread of highly active substances within dedicated handling areas. The level of the required containment is determined by the pharmacological potency of the product to be handled. In the pharmaceutical industry, the Occupational Exposure Limits (OEL) are calculated on the basis of the NOEL (No Observable Effect Level) as well as additional specific factors for the time of exposure or the severity of the negative effects for instance. Those values are categorized in the widely used Occupational Exposure Bands (OEB). Substances with very high to high pharmacologic and toxic effects fall into categories OEB 4 (< 10 µg/m3) and OEB 5 (< 1 µg/m3) for which the industry increasingly uses isolators as appropriate containment systems.

Dec has been recently asked to propose a safe solution for the discharge of a filter dryer and integrated pack-off feature for which we have delivered a filter dryer discharge isolator with integrated pack-off feature, milling chamber and PTS (Powder Transfer System) conveying to a second pack-off isolator with future extension possibilities for a micronising chamber installed on top of the existing enclosure, all of which meeting category OEB 5 (0.3 µg/m3 , 8 hr TWA).

 

Filter Dryer Discharge Isolator

This double chamber negative pressure designed isolator installed in ATEX zone 1 area provides a high containment environment during the automated filter dryer discharge of highly potent APIs with a Minimum Ignition Energy (MIE) of less than 10 mJ. The unit comprises a rake tool to help with heel recovery through the dryer discharge port. Primary discharge is achieved using the agitator sweep. The lift-up front access door for end-of-campaign maintenance of the discharge port is provided with four glove ports. A glove port guard system, interlocked with the filter dryer ensures that access is possible only when pressure and agitator are in a safe condition. In this isolator, the product passes through a milling unit (through-the-wall design) into a suction shoe from where it is transferred by means of a PTS into a pack-off isolator at a transfer distance of 8 to 10 m. Alternately, it can be directly packed-off by means of a continuous liner pack-off head connected to the upper chamber but located within the lower chamber.

 

PTS Safe Powder Transfer and Dosing

The PTS (Powder Transfer System) utilizing both vacuum and pressure is suitable for operation in ATEX areas. The PTS is installed directly on the equipment to be charged. Equipped with an exchangeable CIP cover with integrated liquid separator, the equipment including the filter membrane can be cleaned in place without disassembling any components. The PTS works for all powders regardless of their characteristics, even those that are extremely fine, lumpy or even solvent wet, as during the transfer of such materials the PTS will not modify the homogeneity of the powder. The system excludes most sources of ignition owing to the earthed, conductive components, and the lack of moving parts that could produce incendive mechanical sparks. Its pneumatic operation does not require a source of electricity or motors, obviating electrical sparks and hot surfaces that could also be ignition sources. Electrostatic discharge remains the only potential ignition source; however, this is avoided due to the plug flow of powder in the dense conveying phase through the hose into the PTS chamber. The usual ratio of powder to air is more than 100:1, which is well above the upper explosion limit of most powders. Due to the low conveying velocity it has been calculated and measured that insufficient energy is created to form an electrostatic discharge and powders with an MIE (minimum energy required for ignition) below 1 mJ can be safely conveyed. In this case, the PTS combined with a DosiValve unit is installed on top of the pack-off isolator, receiving and dosing the material accurately into the isolator integrated continuous liners.

 

Pack-Off Isolator

This enclosure features a continuous-liner drum filling station and a roller conveyor on load cells. A self-cleaning venting filter system with liner deflating function vents the filling station during a powder charge. High containment level is maintained by using an airlock for material in- and outlet.

Both isolators are fabricated in accordance with cGMP standards featuring a fully welded design, i.e. the interior is constructed with rounded corners to provide smooth surfaces for easy cleaning. Both isolators also feature a Wash-In-Place (WIP) system consisting of hand-operated spray guns and additional spray balls in the upper chamber. Air quality is maintained by High Efficiency Particulate Air filters (HEPA) for both in- and outlet air filtration.

 

 

 

 


30 Years of Innovation - Let us handle your process